At present, there is no systematic standard mode for mold management in most plastic processing plants in China. The management measures are formulated according to the scale and characteristics of each plant. Small and medium-sized enterprises and large enterprises, professional and non-professional plastic factories have different management methods for their plastic workshops. However, they are similar in basic practice and intended purpose. Each enterprise should establish a management system according to its own characteristics and actual conditions, so that the mold can be properly kept in the management and reach the expected service life.

The place where the injection mold is stored should be flat, dry, and clean for easy lifting and handling. Small molds can be set up and stored in order, while large molds can be placed directly on the mat. The storage should be classified separately, and the matching molds of the same product should be put together. Due to the different actual conditions and conditions of each unit, it is difficult to impose specific storage methods, but the precautions are similar. Most injection molds are valued by operators during use, but are often ignored during storage. However, in actual production, bad storage of molds often causes serious losses in production, which must be paid attention to.

Injection mold is a very rigorous work, and the cost is very high, so it needs to be dustproof, rustproof, and pressureproof. After the production is completed, the mold should be inspected and rust-proof, placed on the mold rack as required, and used in accordance with the requirements of the "Mold Use, Maintenance and Maintenance Specification" to prevent the mold from being damaged due to human negligence and prolong the service life of the mold. Ensure smooth production and stable product quality.

The storage and management of injection molds is an important job in the injection molding industry. If the storage and management of injection molds are not in place, the injection molds will be rusted and damaged. It takes a long time to find a mold or use the wrong mold or even lose the mold.