It is essential to dismantle the inserts in the design mold. Dismantling the inserts reasonably can tell whether you are a good design.

The purpose of dismantling the insert, the purpose of dismantling the insert, and under what circumstances are better to dismantle.

Method/Step

Exhaust In order to better exhaust the mold and make the material better circulate, it is essential to disassemble the sub

2. Convenient processing. Some molds are very complex in structure, processing time is long, time-consuming, and the overall processing risk is high (if a bump is encountered in a certain place, then the entire mold must be scrapped)

3. Save materials, save some material costs to a greater extent, and get more benefits

4. Improve efficiency. After disassembling, it can be processed in multiple ways (simultaneous processing) to get better time to reach working hours

5. Convenient polishing. This should be well understood. The mold is uneven, the structure is weird, and the polished corners will be ignored and missed. It is difficult to polish in place.

6. Interchange requirements Molds are generally one-cavity multi-mold, so several disassembled ones are the same and can be exchanged, so the processing is also convenient, and the installation is simple

7. Easy to modify the mold. If the product is designed to change, the mold is easy to modify and replace, and there is no need to make a new set of molds.

8. Heat dissipation This is the same as water cooling, with an additional way of heat dissipation, which is to avoid poor heat dissipation in very narrow places and isolate them separately to prevent poor material flow and lead to product failure

9. Guarantee accuracy. It can be understood that after removing the insert, it is better to align the insert separately and need to be ground to make the accuracy more accurate.